Download Catalogue
Office Locations
Send Query
Home >> Products Specification >> (HD50MA180)
HD50MA180 is a high flow High Density Polyethylene (HDPE) grade . This grade is specially formulated to manufacture large, intricate, thin walled multi cavity injection moulded products. It has narrow molecular weight distribution, which makes it easier to process and products manufactured have good gloss and rigidity.
Houseware, storage bins, thin wall moulding.
Regulatory Information
Meets the requirements stipulated in standard IS : 10146-1982 on "Specification for Polyethylene for safe use in contact with foodstuffs, pharmaceuticals, and drinking water". It also conforms to the positive list of constituents as prescribed in IS : 10141-1982. The grade and the additives incorporated in it also comply with the FDA:CFR Title 21,177.1520, Olefin polymers.
Storage Recommendations
Bags should be stored in dry / closed conditions at temperatures below 50°C and protected from UV / direct sunlight.
Typical Properties
Properties Test
Unit Typical Value
Melt Flow Index (190 C/2.16 kg) ASTM D1238 gm/10 min. 20.0
Density (23° C) ASTM D1505 gm/cm3 0.950
Tensile Strength at Yield ASTM D638 MPa 22
Elongation at Break ASTM D638 % 12
Flexural Modulus ASTM D790 MPa 900
Notched Izod Impact Strength ASTM D256 J/m 30
Vicat Softening Point ASTM D1525 °C 123